4.14
Corner support column
(No. 93 8010)
▶
DE
EN
FR
▶
IT
ES
44
Attach support columns and corner support column to the perforated
panels using screws ➀ (using square perforation in the perforated panel,
each with 2 screws 6×16 mm), place on the worktop and mark drilled
holes ➁.
Drill holes with ø 5 mm.
1
2
Attach the support columns to the worktop using the screws (two sets
of 8×32) and washers provided.
The distance of the bore of the support columns from the edge of the
worktop may deviate due to production tolerances.