4.13
Media track and corner media track for workbench
(93 3933/34/35/36/37)
Suitable for screwing on to the worktop.
Not suitable for installation between support columns.
Remove the two outermost panels from the media track
▶
(remove the 4 screws).
For the corner media track, also remove the two outermost panels
▶
from each side.
(Remove the adjacent panels too if required).
Place the media track on the worktop
▶
and mark the drilled holes.
Drill the worktop with approx. ø 4 mm
▶
and a depth of approx. 25 mm.
Attach the media track using 4 wood
▶
screws (6x25 mm) and 4 washers
(included in scope of delivery).
The corner media track is attached with
▶
8 wood screws and washers.
INITIAL CONNECTIONS AND ALSO THE CONNECTION OF PLUGS OR
SOCKETS TO CABLES SHOULD ONLy BE PERFORMED By A QUALIFIED
ELECTRICIAN! When assembling the media tracks with modules
individually, check that the sum of the module divider units matches the
media track divider unit.
www.hoffmann-group.com
DE
DE
EN
FR
FR
Detail A
Scale 1:3
IT
IT
ES
ES
43