Installation; Support Columns / Support Columns For Mounting - GARANT Workbench assembies User Manual

4.

Installation

The worktop is not pre-drilled for the installation of workbench assemblies.
DE ▶
Only use the screws provided.
Workbench assemblies must be secured against tipping.
Workstation delivery condition:
EN
„
„
„
4.1

Support columns / support columns for mounting

(92 3000, 93 8000)
FR
▶
IT
Hole diameter 5 mm in bamboo, beech and marine ply.
Hole diameter 3 mm in Eterlux and Eluplan.
Screw-fasten the support columns with the perforated tool panel, place
on the work surface and centre. Distance of the bore from the edge of the
ES
worktop can deviate due to production tolerances.
32
To attach the workbench assemblies to a worktop, the required bores
must be drilled into the worktop.
The workbench assembly of the workstation is delivered pre-assembled
if the total height does not exceed 2.25 m.
The media track is not connected to the lifting unit when delivered.
The laterally fixed LED lighting unit and shelf with lighting are shipped
loose due to risk of damage during transportation.
Attach the support columns to the worktop using the screws provided
according to bore pattern.
20 mm
28 mm
60 mm
20 – 25 mm