Advertisement
Suggested Guttering System
BO23
If the locality where you have installed
the patio cover/carport could bene t
from a guttering system, we recom-
mend the following list of materials,
(not included).
One 10' gutter (304,8 cm)
One downspout
One outlet
One right & One left end cap
Sealant
Five hidden hangers
with ve 1 1/2" (38 mm) bolts and
nuts
Three standard elbows
Two bands
with four sheet metal screws
1
Assemble the gutter on the ground
using sealant.
2
Temporarily remove top front trim,
lift assembly to unit and mark top left
and right end trim where gutter meets
trim. Remove gutter system and notch
(using tin snips) top L&R end trim so
gutter ts ush along front of unit.
3
Evenly space out ve hidden hang-
ers in gutter, making sure one is in
the outlet. Attach gutter assembly to
front facia/ front roof channel using
ve 1 1/2" (38 mm) bolts and nuts
through hidden hangers. Replace
top front trim.
4
Assemble the downspout on the
ground.
5
Hold in place on outlet. Attach
to post with two bands. Drill 3/32"
(2 mm) holes and fasten with sheet
metal screws.
Left End Cap
Post
Screw
Top Front Trim
1 1/2" (38 mm) Bolt
Hidden Hanger
Gutter
23
(not included)
Gutter
Outlet
Elbow
Elbow
Band
Downspout
Elbow
Top End Trim
Nut
Notch
Advertisement
