Advertisement
Step 5
BO16
1
Place front facia over front roof
channel with largest amount of holes
on top. Fasten bottom ange with ve
#10Ax 3/8" (10 mm) screws. Fasten
top flange using three #10 screws
where shown.
2
Place right and left facia over
end roof channels. Fasten bottom
ange with ve #10 screws. Fasten
top ange in the same manner.
3
Place a well-nut on top ange of
the front facia. Insert all the way into
pre-drilled hole until ange is rmly
against mounting surface. Continue
along length of the front facia piece.
Parts Needed For
Facia Assembly
STEP
Press rmly against mounting surface
9657
Overlap
16
3
#10-32 Well-Nut
9732
Facia
9732 Front Facia (one)
9654 Right Facia (one)
9657 Left Facia (one)
STEP
2
9654
STEP
1
Post
Roof Channel
Advertisement
