Exit Unit - Samsung ProXpress M453x series Service Manual

3.3.14. Exit Unit

1. Remove the rear/front/left/right cover. (Refer to
3.3.1~3.)
2. Remove the fuser unit. (Refer to 3.2.1.)
3. Remove the top cover. (Refer to 3.3.4.)
4. Remove 2 screws. Then release the bracket.
NOTE
When reassembling the exit unit, first tighten these
screws to secure the frame and bracket.
5. Remove 4 screws from the rear.
Copyright© 1995-2017 SAMSUNG. All rights reserved.
6. Remove 2 screws. Release the Exit unit after pull it to
the rear slightly.
3. Disassembly and Reassembly
3-21