Samsung ProXpress M453x series Service Manual page 110

4. Troubleshooting
Paper jam in exit area
CAUTION
The Fuser area is hot, please wait until device cools down
before accessing this area. Turn power off to cool the
machine down. Take care when removing paper from
the machine.
1) Gently pull the paper out of the output tray.
If you do not see the paper in this area, stop and go to
next step:
2) Open the rear cover.
4-15
3) Remove the jammed paper by gently pulling it straight
out.
4) Close the rear cover.
Copyright© 1995-2017 SAMSUNG. All rights reserved.