Connect Titan - Geneinno TITAN User Manual

Charger

Connect Titan

Mobile device： with Android or IOS GeneROV APP installed
②
③
Titan
Connect instructions：
1. Connect device: Insert one end of the wireless relay cable into the socket of the wireless
relay and tighten it with force. Insert the other end into the socket of the host machine and
tighten it with equal force, then complete Titan connection and power on.
2. App connect: when Titan gets to work(about 1 minute after connection), the LED light
on ,Titan will flash twice every several seconds, it means the Titan is ready to connect to
your phone, pad and PC devices, search the Wi-Fi hotspot named GENEINNO_XXXX,
connect your device to it, the default passwords is 88886666, then get to the app control
interface.
3. Operation: Put Titan into the water, you can freely control Titan to rise and dive.Wireless
relay has low grade waterproofing standard. It is recommended to be placed on shore or
on board and fixed to avoid the difficulty of recovery after being dragged into the water by
Titan.
Copyright © 2018 GENEINNO All Rights Reserved.
① Plug
② Adapter
③ Charging port
①
⑤
wireless relay
④