Table of Contents
Advertisement
Charger
Connect the system
Android and IOS
②
③
Drone
Usage ：
1.Connect device: Insert one end of the wireless relay cable into the socket of the wireless
relay and tighten it with force. Insert the other end into the socket of the drone and
tighten it with equal force, then complete the connection and power on.
2.App connect: when the drone gets to work (about 1 minute after connection), the LED
light on, the drone will flash twice every several seconds, it means the machine is ready to
connect to your phone, pad and PC devices, search the Wi -Fi hotspot named
GENEINNO_XXXX, connect your device to it, the default passwords is 88886666, then get
to the app control interface.
3.Operation: Put Geneinno T1into the water, you can freely control it to rise and dive.
Wireless relay has low grade waterproofing standard. It is recommended to be placed on
shore or on board and fixed to avoid the difficulty of recovery after being dragged into the
water by the drone.
Copyright © 2018-2022 GENEINNO All Rights Reserved.
① Plug
② Adapter
③ Charging port
④
①
⑤
wireless
relay
4
Advertisement
Table of Contents
