Advertisement
Mid-Century Spindle Toddler Rail
Assembly Instructions
Once the toddler bed is in use, periodically check to make sure all bolts are tight, and tighten as necessary. Keep these
instructions for future use.
MAINTENANCE
Upon completion of assembly, be sure all screws, bolts and fastening devices have been tightened securely. Periodically
repeat this check to make sure all screws, bolts and fastening devices are tight. Before each usage or assembly, inspect
toddler bed for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use toddler bed if parts are missing
or broken. DO NOT substitute parts. DO NOT make any alteration to this toddler bed.
CLEANING
Mix together a mild solution of gentle dishwashing liquid and water, apply to toddler bed surface using a soft clean cloth
lightly dampened in the solution. Rinse with clean water again using a soft clean cloth, then dry all surfaces thoroughly with
a soft dry cloth. NO ABRASIVE CLEANERS, SCOURING PADS, STEEL WOOL OR COARSE RAGS SHOULD BE USED TO CLEAN
THIS FINE FURNITURE.
STORAGE
After completing the assembly process you are advised to read and beware of all WARNINGS, CAUTIONS, CLEANING,
STORAGE, USE AND MAINTENANCE notices contained in these instructions. For long term storage of the toddler bed, store
in a cool, dry place and keep away from moisture and extreme temperature changes.
800.967.6696 | crateandbarrel.com
Advertisement
