Advertisement
Mid-Century 3-in-1 Spindle Crib
WARNING:
!
• Failure to follow these warnings and assembly instructions could result in serious injury or death.
• Read all instructions before assembling crib. Keep instructions for future use.
WARNING:
!
• For toddler bed use, the minimum age shall be no less than 15 months, and the maximum weight shall not be
greater than 50 lb (22.7 kg).
• Infants can suffocate on soft bedding. Never add a pillow or comforter. Never place additional padding under an
infant.
• To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep, unless
otherwise advised by your physician.
Strangulation Hazard:
• Strings can cause strangulation! DO NOT place items with a string, cord or ribbon around a child's neck, such as
hood strings or pacifier cords. DO NOT suspend strings over crib or toddler bed, or attach strings to toys for any
reason.
• To help prevent strangulation, tighten all fasteners. A child can trap parts of the body or clothing on loose fasteners.
• DO NOT place crib or toddler bed near windows where cords from blinds or drapes may strangle a child.
Fall Hazard:
• When child is able to pull to standing position, set mattress to lowest position and remove bumper pads, large toys
and other objects that could serve as steps for climbing out.
• When child is able to climb out or reaches the height of 35 inches (90 cm), the crib shall no longer be used and the
child should be placed in a youth or regular bed.
CAUTION: ANY MATTRESS USED IN THIS CRIB
!
MUST BE AT LEAST 27-1/4 INCHES (69 cm) BY 51-5/8
INCHES (131 cm) WITH A THICKNESS NOT EXCEEDING
6 INCHES (15 cm).
• Check this product for damaged hardware, loose joints, missing parts or sharp edges before and after assembly and
frequently during use. Securely tighten loose bolts and other fasteners. DO NOT use crib if any parts are missing,
damaged, or broken. Contact Crate and Barrel® for replacement parts and instructional literature if needed. DO NOT
substitute parts.
• If refinishing, use a non-toxic finish specified for children's products.
• Never use plastic shipping bags or other plastic film as mattress covers because they can cause suffocation.
• Infants can suffocate in gaps between crib sides and a mattress that is too small.
• Periodically check to see that all bolts are securely tightened.
• To clean crib: Wipe with clean soft cloth dampened with a mild cleanser and water. Rinse with clean water using a
soft cloth, and dry thoroughly.
• Follow warnings on all products in a crib.
• When a vaporizer is in use, always aim vapor steam away from the crib as well as away from other wood furniture.
Made in Vietnam - r09
Assembly Instructions
800.967.6696 | crateandbarrel.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Crate&Barrel Mid Century 3 in 1 Spindle Crib
Summary of Contents for Crate&Barrel Mid Century 3 in 1 Spindle Crib
- Page 1 Mid-Century 3-in-1 Spindle Crib Assembly Instructions WARNING: • Failure to follow these warnings and assembly instructions could result in serious injury or death. • Read all instructions before assembling crib. Keep instructions for future use. WARNING: • For toddler bed use, the minimum age shall be no less than 15 months, and the maximum weight shall not be greater than 50 lb (22.7 kg).
- Page 2 Mid-Century 3-in-1 Spindle Crib Assembly Instructions This page lists the contents included in the box. Please take time to identify the hardware as well as the individual components of the product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
- Page 3 Mid-Century 3-in-1 Spindle Crib Assembly Instructions 2 - Side panels 2 - End panels 1 - Bottom 1 - Mattress dust panel support panel 2 - Leg A 2 - Leg B 800.967.6696 | crateandbarrel.com...
- Page 4 Mid-Century 3-in-1 Spindle Crib Assembly Instructions Attach 1 leg A and 1 leg B to each side panel as shown. Secure, but not fully tighten, each leg with 2 large bolts, 2 spring washers and 2 flat washers, using a small Allen wrench. (pre-attached to large bolts) With assistance of another adult, attach 2 side panels to 1 end panel with 8 large bolts, 8 spring washers and 8 flat washers as shown.
- Page 5 Mid-Century 3-in-1 Spindle Crib Assembly Instructions (pre-attached to large bolts) With assistance of another adult, attach 2 side panels to remaining end panel with 8 large bolts, 8 spring washers and 8 flat washers as shown. Do not fully tighten until further instructions. Place bottom dust panel into assembly as shown.
- Page 6 Mid-Century 3-in-1 Spindle Crib Assembly Instructions High Middle Determine the desired height (low, middle, high) for the crib mattress. Fit each support pin into corresponding corner as shown. Make sure support pin is securely engaged with assembly. NOTE: Make sure metal plate of mattress panel is at the bottom during assembly...
- Page 7 Mid-Century 3-in-1 Spindle Crib Assembly Instructions Once the crib is in use, periodically check to make sure all bolts are tight, and tighten as necessary. Keep these instructions for future use. MAINTENANCE Upon completion of assembly, be sure all screws, bolts and fastening devices have been tightened securely. Periodically repeat this check to make sure all screws, bolts and fastening devices are tight.
Need help?
Do you have a question about the Mid Century 3 in 1 Spindle Crib and is the answer not in the manual?
Questions and answers