Changing The Backlight Time Length; Power Save Mode - Sanyo MIRRO PLS-3810 User Manual

Changing the Backlight Time Length

Select how long the main screen and keypad remain backlit after
any keypress is made.
Press > Settings > Display > Backlight > Backlight Dim
or
Backlight Off.
If you select
Backlight Dim
, or a preset length of time to elapse before 
Always Dim
the screen backlight dims.
If you select
Backlight Off
elapse before the screen and keypad backlights turn off.
(When you select
Always Bright
setting above, the keypad backlight will turn off after about
one minute.)
Note
Long backlight settings reduce the battery's talk and
standby times.
Selecting a Picture ID
You can select an image as a picture ID.
1. Press
> Settings > Display > Picture ID
2. Select ,
Contacts Unsaved Numbers
28 2B. Settings
, 
, select
Always Bright
, select a preset length of time to
for the
Backlight Dim
.
, or
Private / Unknown
If you select
Contacts
and then select an entry.
One Contact
3.
Select a picture ID option by pressing the navigation key up
or down, and then select an image.
If you select
Take New Picture
4. If you are satisfied with the image on the preview screen,
press .

Power Save Mode

This feature helps conserve your battery power by automatically
adjusting settings for certain phone features.
1.
Press
> Settings > Display > Power Save Mode
2.
Select . (Select
On
3.
Read the message and press
Changing the Clock/Calendar Display
Choose which design of clock or calendar you want to display in
standby mode.
1.
Press
> Settings > Display > Clock/Calendar
2.
Highlight a display option and press
.
, or select 
, select
All Contacts
, press to take a picture.
to deactivate this feature.)
Off
(left softkey).
CONTINUE
.
.
.