Viewing The Display Screen - Sanyo MIRRO PLS-3810 User Manual

16.
lets you hear the different ringers and sounds. You
Speaker
can mute the ringer when receiving incoming calls by
pressing or the side camera button.
17. , as part of the built-in camera, lets you take
Camera Lens
pictures.
18.
lets you open the battery cover to
Battery Release Slot
replace the battery.
19.
Micro-USB Connector
charging cable or USB data cable (not included).
Inserting an accessory into the incorrect jack may damage
the phone.
20.
Volume Button allows you to adjust the ringer volume
whenever your phone is turned on or adjust the voice volume
during a call.
21.
lets you open the Photos menu when
Side Camera Button
the phone is open. This button also allows you to mute the
ringer when receiving incoming calls.
22.
facilitates reception and transmission. To
Internal Antenna
maximize performance, do not obstruct the internal antenna
while communicating. (See page 14.)
8 2A. Phone Basics
allows you to connect a compatible
CAUTION!

Viewing the Display Screen

The status bar at the top of your phone's display screen provides
information about your phone's status and options. These tables
identify the major symbols you'll see on the status bar or other
positions of your phone's display screen.
Tip To view a list of your phone's icons and descriptions, press
MENU/OK > Settings > Phone Info > Icon Glossary .
Service Icons
– Your phone's current signal strength. 
Signal Strength
(More bars = stronger signal.)
No Service
– Your phone cannot find a usable signal.
Roaming
– Your phone is "roaming" off the home network.
Web Service
– 1xRTT Web service is available. When active, the
icon is animated.
Web Service Dormant
Web Service Unavailable
– Web service is currently dormant.
– Web service is currently unavailable.