Saving A Phone Number - Sanyo MIRRO PLS-3810 User Manual

End-of-Call Options
After you have finished your call, the phone will display an end-of-
call message. "Call ended" and the duration of the call will
alternately flash beneath the caller's name (if already in your
Contacts) or the caller's number (if available). Press any key below
to select an option; press any other key to stop the end-of-call
display.
Press to call a highlighted entry.
Press to display all history for a highlighted entry.
Press (right softkey) to display the Recent History
OPTIONS
options. (See "History Options" on page 44 for details.)
Press
SEND MESSAGE
message.
Press to return to standby mode.
Press or simply wait 10 seconds to return to where you
were before the call (if applicable).
If you press a key other than one of those above, the Recent
History screen is displayed. (See "Viewing History" on page 43.)
18 2A. Phone Basics
(left softkey) to send a text or picture

Saving a Phone Number

Your phone can store up to 300 Contacts entries and each entry
can contain up to seven phone numbers. (See section 2D,
"Contacts," on page 47.)
1.
From standby mode, enter a phone number and press
OPTIONS (right softkey)
are saving an entry to Contacts, skip to step 3.)
2.
Select or
New Entry Existing Entry
3. If you chose
New Entry
enter the new entry name.
– or –
If you chose
Existing Entry
want to save the number, and then highlight a number type
and press .
4.
Press DONE (left softkey) to save the entry.
> Save . (If this is the first time you
.
, select a number type, and then
, select an entry to which you