Hyundai Santa Fe Owner's Manual page 568

What to do in an emergency
5. Insert the sealant bottle into the
housing of the compressor (4) so
that the bottle is upright.
6. Ensure that the compressor is
switched off, position 0.
CAUTION
Securely install the sealant fill-
ing hose to the valve. If not,
sealant may flow backward,
possibly clogging the filling
hose.
6-30
OTM068008
7. Connect TMK cables to the bat-
tery in numerical order.
➀
RED cable : (+) battery terminal
➁
BLACK cable : (-) battery termi-
nal
•
TMK cable connection can be
dangerous if done incorrectly.
Therefore, to avoid harm to
yourself or damage to TMK or
battery, follow the TMK cable
connection procedures.
ODM063019
CAUTION
•
When disconnecting
cables, disconnect BLACK (-)
cable first from the battery
and then disconnect RED (+)
cable.
•
Be careful the spark from the
battery when connect or dis-
connect the battery cables.
8. With the engine start/stop button
position on or ignition switch posi-
tion on, switch on the compressor
and let it run for approximately
5~7 minutes to fill the sealant up
to proper pressure. (refer to the
Tyre and Wheels, section 8). The
inflation pressure of the tyre after
filling is unimportant and will be
checked/ corrected later.
Be careful not to overinflate the
tyre and stay away from the tyre
when filling it.
TMK