Hyundai Santa Fe Owner's Manual page 210

Traffic change (if equipped)
The low beam light distribution is
asymmetric. If you go abroad to a
country with opposite traffic direction,
this asymmetric part will dazzle
oncoming car driver.
To prevent dazzle, ECE regulation
demand several technical solutions
(ex. automatic change system, adhe-
sive sheet, down aiming). These
headlamps are designed not to daz-
zle opposite drivers.
You can activate or deactivate the
Traffic Change feature from the User
Settings mode on the LCD display.
Go to 'Lights Travel mode'.
For more details, refer to "LCD
Display" in this chapter.
Headlamp levelling device
(if equipped)
Manual type
To adjust the headlamp beam level
according to the number of the pas-
sengers and loading weight in the
luggage area, turn the beam levelling
switch.
The higher the number on the switch
position, the lower the headlamp
beam level. Always keep the head-
lamp beam at the proper levelling
position, otherwise headlamps may
dazzle other road users.
Listed below are examples of appro-
priate switch settings for varying
loads. For loading conditions other
than those listed, adjust the switch
position to the most similar situation.
Loading condition
Driver only
Driver + Front passenger
Full passengers (including driver)
Full passengers (including driver)
+ Maximum permissible loading
OTM048070R
Driver + Maximum permissible
loading
Switch
position
3
0
0
1
2
3
3-119