Sensing Fields; Led Signal - BEA FALCON User Manual

SETTING
THE SENSING
FIELD
DIMENSIONS
The sensing fields here on the
right correspond to the
following adjustments:
• tilt angle: 15°, 30°, 45°
• sensitivity: 9.
The sensing fields here on the
right correspond to the
following adjustments:
• tilt angle: 15°, 30°, 45° ;
• sensitivity: 9.
The sensing fields here on the
right correspond to the
following adjustments:
• tilt angle: 15°, 30°, 45° ;
• sensitivity: 9.
• When the power is turned ON, the red and green LEDs flash for few seconds.

LED SIGNAL

• During a detection the red LED lights on.
• During configuration, the red LED flashes a number of times corresponding to the parameter being
changed (see next table). The green LED flashes a number corresponding to its setting.
75.5351.02 EN 20080317 (75.5350)
FALCON (Mounting height: 16.5 feet)
6 3 0 3 6
3
6
9
12
15
18
21
H = 16.5 ft.
S = 9
FALCON (Mounting height: 11.5 feet)
6 3 0 3 6
3
6
9
12
15
18
21
H = 11.5 ft.
S = 9
FALCON XL (Mounting height: 8 feet)
6 3 0 3 6
3
6
9
12
H = 8 ft.
S = 9
15
3
6
9
12
15
The sensing fields here on the
right correspond to the following
18
adjustments:
• tilt angle: 30°
21
• sensitivity: 9, 6, 3
3
6
9
12
15
The sensing fields here on the
right correspond to the
18
following adjustments:
• tilt angle: 30°
21
• sensitivity: 9, 6, 3
3
6
The sensing fields here on the
right correspond to the
9
following adjustments:
• tilt angle: 30°
12
• sensitivity: 9, 6, 3
15
6 3 0 3 6
3
6
9
12
15
18
21
H = 16.5 ft.
Angle = 30°
6 3 0 3 6
3
6
9
12
H = 11.5 ft.
Angle = 30 °
15
6 3 0 3 6
3
3
6
6
9
9
12
12
H = 8 ft.
Angle = 30 °
15
15
Page 3 of 7
3
6
9
12
15
18
21
3
6
9
12
15