Sirius Operation; Switching To Sirius Mode; Selecting User-Preset Channel; Selecting Channel Up/Down - Sanyo ECD-T1540 Function Manual

SIRIUS OPERATION

5
S-MOD
2

SWITCHING TO SIRIUS MODE.............................(1)

Press MOD button (1) to select Sirius mode.

SELECTING USER-PRESET CHANNEL.................(2)

At Sirius mode, the Sirius user-preset channel group (3 groups) is toggled cyclically through the
group by quickly pressing the BND/LOUD/ENTER button (2).
The channel will change in the following order:
SR1

SELECTING CHANNEL UP/DOWN........................(3)

Press the MANU/SKIP

SEARCHING STATION........................................(4)

When the AS/PS/P.SCAN button (4) is pressed, the channel searches for each user preset
station from SR1 to SR2 to SR3.
When an available channel is detected, the station will be held at that preset number and play for
5 seconds. After that, it will mute and search for another available station

STORING PRESET STATIONS .................................(8)

The preset buttons (8) can be used to store 6 stations for convenient access to your favorite
stations.
• Programming stations ..... 1. Select the desired station you want to store in memory.
• Quick tuning .................... Press one of the six preset buttons 8 shortly to select a preset
VOLUME
LOUD/
P .SCAN
ENTER
4
SR2
or button (3) to select the channel up or down.
2. Press and hold one of the preset buttons (8) for more than 2
seconds until the corresponding preset button number appears.
Repeat steps 1. and 2. to program additional stations.
station directly.
SAT
8
SR3
2
45W x 4
MANU/SKIP
1
6 7
3