Advertisement
Table of Contents
PLAYING A DISC
FORWARD/BACKWARD SEARCH
Press and hold the
or
buttons
during play to scan the disc at high speed.
When the desired section of the disc is
found, release the button. Normal play will
resume.
.................Forward
.................Reverse
Ê
If you press and hold the
button
while playing, it will scan the
track
forward at high speed.
Ë
If you press and hold the
button
while playing,
it will scan the track
backward at high speed.
ANTI-SKIP PROTECTION
The ultimate anti-skip protection keeps
the music playing under virtually any
conditions. It does this by using a new
quick-focus laser, rapid-access
mechanism and fast-read circuitry.
i
When the Anti-S button is pressed
during play, the
indicator appears
in the display. Digital data equivalent
to 300 seconds is stored in a "read
ahead" memory buffer before it is
decoded and played. The
mark
changes to a
mark, indicating the
buffer is full.
i
When the unit is subjected to a shock
during play the data stored in
memory continues to be decoded and
played. This gives the pickup time to
stabilize and continue reading new
data. As the data is read from
memory the indicator changes to
i
When the data buffer is filling, the
disc will turn at normal speed. After
the data buffer has been filled the
disc will turn slower and then stop
(conserving battery life). The data
stored in memory continues to be
decoded. After the buffer has been
emptied the disc will begin to turn
again.
i
Press the Anti-S button to turn anti-
skip protection off.
NOTE: Keep the anti-skip function off when
using the unit in a stable location
where it will not be subjected to
shocks.
The
battery
consumption is reduced when skip
protection function is turned off
NOTE: When ANTI-S is switched on or off,
the sound will be interrupted for 1
to 2 seconds. This is normal (the
interrupted time is used for the
memory to switch on or off).
.
10
BASS X PANDER
Use this function to increase the bass
output.
AUTO POWER ON FUNCTION
The power turns on automatically when
the
button is pressed.
RECORDING FROM THE AUX OUT JACK
The output from the CD player can be
recorded.
l
Connect a patch cable (not supplied)
from the AUX OUT jack on the CD
player to the LINE INPUT jacks on a
cassette recorder.
power
BASSXPANDER
AUTO POWER ON / OFF FUNCTION
AUTO POWER OFF FUNCTION
The power turns off automatically 30
seconds after all tracks on a disc have
been played or the
PROGRAMMED PLAY
The sound from the CD can be heard
through the speakers.
l
Connect a patch cable (not supplied )
from the AUX OUT jack on the CD
player to the AUX or CD INPUT jacks on
a stereo system.
TO AUX OUT JACK
11
OFF BASS X ON
BOOST
button is pressed.
Advertisement
Table of Contents
