Makita DUR365U Instruction Manual page 11

Installing the handle
3
1. Grip 2. Handle 3. Screw
Insert the shaft of the handle into the grip. Align the
screw hole in the grip with the one in the shaft. Tighten
the screw securely.
2
1. Handle clamp 2. Screw
Place handle between handle clamp and handle holder.
hand-tightening knob.
Installing the guard
WARNING:
• Never use the tool without the guard illus-
trated in place. Failure to do so can cause
• Always use the tool with the approved combina-
tion of the safety equipments. Otherwise contact
• Permitted combination for the cutting tool and
the guard may differ from country to country.
Follow your region's regulations.
For metal blade
1
2
For nylon cutting head or plastic
blade
1
-
Align the clamp on the pipe with the protector. And
tighten them with bolts.
11 ENGLISH
2
1. Clamp 2. Bolt
CAUTION:
for cutting the nylon cord when installing nylon
cutting head or plastic blade.
3
1. Cutter 2. Clamp 3. Bolt
1
2
1