Makita DUR365U Instruction Manual
Cordless grass trimmer
Hide thumbs
Also See for DUR365U:
- Instruction manual (121 pages) ,
- Instruction manual (20 pages) ,
- Instruction manual (112 pages)
Related Manuals for Makita DUR365U
Summary of Contents for Makita DUR365U
- Page 1 INSTRUCTION MANUAL Cordless Grass Trimmer DUR365U Read before use.
- Page 2 SPECIFICATIONS Model DUR365U Type of handle Bike handle No load speed 3,500 / 5,300 / 6,500 min Overall length (without cutting tool) 1,754 mm Nylon cord diameter 2.0 – 2.4 mm Metal blade Nylon cutting head Plastic blade (P/N 195150-5)
- Page 3 Save all warnings and instruc- tions for future reference. Intended use The cordless grass trimmer / brushcutter / string trimmer is only intended for cutting grass, weeds, bushes and undergrowth. It should not be used for any other purpose such as edging or hedge General instructions Never allow people unfamiliar with these instruc- tions, people (including children) with reduced...
- Page 4 If the tool gets heavy impact or fall, check the manufacturer. A charger that is suitable for one condition before continuing work. Check the con- trols and safety devices for malfunction. If there is used with another battery pack. any damage or doubt, ask our authorized service center for the inspection and repair.
- Page 5 Kickback (Blade thrust) Transport Kickback (blade thrust) is a sudden reaction to a Before transporting the tool, turn it off and remove the caught or bound cutting blade. Once it occurs, the battery cartridge. Attach the cover to the cutting blade. tool is thrown sideway or toward the operator at When transporting the tool, carry it in a horizontal position by holding the shaft.
-
Page 6: Battery Cartridge
SAVE THESE INSTRUCTIONS. CAUTION: Only use genuine Makita batteries. Use of non-genuine Makita batteries, or batteries that have been altered, may result in the battery bursting also void the Makita warranty for the Makita tool and charger. 6 ENGLISH... -
Page 7: Table Of Contents
PARTS DESCRIPTION Battery cartridge Cutting tool Hanger (suspension point) Power lamp Lock-off lever Speed indicator Switch trigger Reverse button Grip Main power button Protector (cutting tool guard) Shoulder harness 7 ENGLISH... - Page 8 Indicating the remaining battery FUNCTIONAL capacity DESCRIPTION Only for battery cartridges with the indicator WARNING: • Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. Failure to switch off and remove the battery from accidental start-up.
-
Page 9: Lock-Off Lever
Overload protection Remaining battery capacity indication Battery indicator status O f f B l i n k i n g Remaining battery capacity Blinking 50 % - 100 % If the tool is overloaded by entangled weeds or other debris, the tool stops automatically, and all of the speed 20 % - 50 % indicators blink. -
Page 10: Switch Trigger
To prevent the switch trigger from being accidentally To reverse the rotation, tap the reverse button and pull pulled, a lock-off lever is provided. the trigger when the tool’s head is stopped. The power To start the tool, grasp the right grip (the lock-off lever is lamp starts blinking, and the tool's head rotates in released by the grasp) and then pull the switch trigger. - Page 11 For metal blade Installing the handle 1. Grip 2. Handle 3. Screw Insert the shaft of the handle into the grip. Align the screw hole in the grip with the one in the shaft. Tighten the screw securely. 1. Clamp 2. Bolt For nylon cutting head or plastic blade CAUTION:...
- Page 12 Install the clamp washer and secure the metal blade with the hex nut with 13 to 23 Nm of tightening • Be sure to use genuine Makita nylon cutting head torque during holding the receive washer with hex / plastic blade.
- Page 13 OPERATION Correct handling of tool WARNING: • Be extremely careful to maintain control of the tool at all times. Do not allow the tool to work vicinity. Failure to keep control of the tool and the operator. 1. Nylon cutting head 2. Metal guard 3. Receive Correct posture washer 4.
- Page 14 1. Buckle The buckle is provided with a means of quick release. Simply squeeze the sides of the buckle to release the tool. Adjustment of the hanger position and shoulder harness on the hanger with the supplied wrench and then move the hanger and the cushion.
- Page 15 For 95-M10L 100 mm 2.4 mm 2.4 mm ≤ ≤ 80 mm 15 ENGLISH...
- Page 16 For Proulx 4.5 m 2.4 mm 2.4 mm ≤ ≤ 100 mm NOTICE: Remove remaining nylon cord before replacing. Turn the spool clockwise until the remaining cord is retracted and then pull it our from the top of the spool. 16 ENGLISH...
- Page 17 For B&F ECO4L 100 mm 2.4 mm 2.4 mm ≤ ≤ 80 mm 17 ENGLISH...
- Page 18 1. Arrow on the protector 2. Arrow on the blade To maintain product SAFETY and RELIABILITY, be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. 18 ENGLISH...
- Page 19 TROUBLE SHOOTING do not attempt to dismantle the tool. Instead, ask Makita Authorized Service Centers, always using Makita replace- ment parts for repairs. Malfunction status Cause Action Battery cartridges are not installed. Install the battery cartridges. Recharge the battery cartridge. If recharging Motor does not run.
- Page 20 These accessories or attachments are recom- manual. The use of any other accessories or attach- use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. • Cutter blade •...