Macro-Photography (Zoom) - Sanyo Xacti VPC-TH1 Instruction Manual

MACRO-PHOTOGRAPHY (ZOOM)

Your camera has two zoom functions: optical zoom and digital zoom.
1
Point the camera lens at the
subject.
2
Push the zoom switch toward
[T/]] or [W/P] to compose
the desired image.
[T/]]: Zoom in on the subject.
[W/P]: Zoom out.
h When the zoom switch is
pushed, the zoom bar appears
on the monitor.
h When moving the optical
zoom, push the zoom switch
lightly to zoom slowly, and
press more strongly to zoom
quickly.
h When the optical zoom factor
is at maximum, zooming stops
temporarily. When the zoom
switch is pushed toward the
[T/]] side again, the mode
changes to the digital zoom
mode and zooming continues
(in the NORMAL mode).
3
Take the picture.
For video clip recording, see
page 62.
For shooting single shots, see
page 63.
For shooting sequential shots,
see page 85.
69
English
Monitor
When optical
zoom only is
enabled
When both
optical and digital
zoom are enabled
Digital zoom (yellow)
Zoom switch
[T/]]/[W/P]
Pointer
Zoom bar
Optical zoom