Macro-Photography (Zoom) - Sanyo VPC-CS1 Manual For Basic Operation

MACRO-PHOTOGRAPHY (ZOOM)

Your camera has two zoom functions: optical zoom and digital zoom.
1
Point the camera lens at the
subject.
2
Push the zoom switch toward
[T/]] or [W/P] to compose
the desired image.
[T/]]: Zoom in on the subject.
[W/P]: Zoom out.
h When the zoom switch is
pushed, the zoom bar appears
on the monitor.
h When the optical zoom factor
is at maximum, zooming stops
temporarily. When the zoom
switch is pushed toward the
[T/]] side again, the mode
changes to the digital zoom
mode and zooming continues.
3
Take the picture.
For video clip recording, see
page 31.
For shooting single shots, see
page 32.
For shooting sequential shots,
see page 45.
Zoom switch
Monitor
When both
optical and digital
zoom are enabled
Optical zoom
Digital zoom (yellow)
When optical
zoom only is
enabled
Zoom bar
Pointer
38
English