Sanyo VPC-TH1BL Quick Manual

QUICK GUIDE

1
2
Dual Camera
VPC-TH1EX
VPC-TH1
VPC-TH1GX
STEP 2
CAPTURE A STILL IMAGE
Turn on the camera.
Press the [ ]
button.
RECORD A VIDEO CLIP
If the image is not captured...
Is there enough power left in the battery? Recharge
the battery pack.
(See "Charge the battery pack" on the reverse side.)
You can capture a still image while recording
a video clip.
STEP 1
1
Turn on the camera.
Press the ON/OFF
button for at least
1 second.
If the screen to
set the date and
time appears,
press the MENU
button 2 times to
cancel it.
2
Press the [
button to begin
recording a video
clip.
To stop recording,
press the [
button again.
1
Press the [
button to begin
recording.
2
To capture a single
shot while
recording, press the
[ ] button.
The scene at the
time the [
button was
pressed is
captured as a still
image.
]
]
]
]