Macro-Photography (Zoom) - Sanyo Xacti VPC-HD2000 Instruction Manual

MACRO-PHOTOGRAPHY (ZOOM)
Your camera has two zoom functions: optical zoom and digital zoom.
1
Point the camera lens at the
subject.
2
3
Push the zoom switch toward
[T/O,_.] or [W/_] to compose
the desired image.
[T/O,,.]: Zoom in on the subject.
[W/_ ]: Zoom out.
• When the zoom switch is
pushed, the zoom bar appears
on the monitor.
• When moving the optical
zoom, push the zoom switch
lightly to zoom slowly, and
press more strongly to zoom
quickly.
• When the optical zoom factor
is at maximum, zooming stops
temporarily. When the zoom
switch is pushed toward the
[T/O,,.] side again, the mode
changes to the digital zoom
mode and zooming continues.
Take the picture.
For video clip recording, see
page 74.
For shooting single shots, see
page 75.
For shooting sequential shots,
see page 100.
Zoom switch
Monitor
Zoom bar
|
When both J. ,
optical and digital
zoom are enabled _r _'
Optical zoom I
Digital zoom (yellow)
When optical
zoom only is
enabled
Pointer
81 English