Manual Unlock Operation; Manual Lock Operation; Door Key Unlock Operation; Door Key Lock Operation - Toyota MR2 2000 Manual

Hide thumbs Also See for MR2 2000:
Table of Contents

Advertisement

DOOR LOCK CONTROL
SYSTEM OUTLINE

1. MANUAL UNLOCK OPERATION

When the door lock control SW of the driver's or passenger's side door is pushed to UNLOCK, the door lock will unlock.

2. MANUAL LOCK OPERATION

When the door lock control SW of the driver's or passenger's side door is pushed to LOCK, the door lock will lock.

3. DOOR KEY UNLOCK OPERATION

Unlock operation from driver's side door
When the driver's side door is unlocked once using the ignition key, only the driver's side door is unlocked. If this operation is
repeated within 3 seconds, all the other doors are unlocked.
Unlock operation from front passenger's side door
When the passenger's side door is unlocked using the ignition key, all the other doors are unlocked, too.

4. DOOR KEY LOCK OPERATION

Lock operation from driver's side door
When the driver's side door is locked using the ignition key, all the other doors are locked.
Lock operation from front passenger's side door
When the passenger's side door is locked using the ignition key, all the other doors are locked, too.
5. IGNITION KEY REMINDER OPERATION
When the door lock operation is made using the door knob with the ignition key remained inserted in the key cylinder and the
door open, unlock operation is automatically made. Additionally, if lock operation is made with the door lock control SW or
door key lock and unlock SW, unlock operation is automatically made after the lock operation has been completed.
SERVICE HINTS
D6, D7 DOOR COURTESY SW LH, RH
1–GROUND : Closed with door open
D5 DOOR LOCK CONTROL SW
3–1 : Closed with LOCK position
6–1 : Closed with UNLOCK position
D8 DOOR LOCK MOTOR, DOOR KEY LOCK AND UNLOCK SW AND DOOR UNLOCK DETECTION SW LH
5–GROUND : Approx. 12 volts with door lock motor at lock operate
6–GROUND : Approx. 12 volts with door lock motor at unlock operate
4–2 : Closed with door lock cylinder locked with key
3–2 : Closed with door lock cylinder unlocked with key
D9 DOOR LOCK MOTOR, DOOR KEY LOCK AND UNLOCK SW AND DOOR UNLOCK DETECTION SW RH
1–GROUND : Approx. 12 volts with door lock motor at lock operate
2–GROUND : Approx. 12 volts with door lock motor at unlock operate
3–5 : Closed with door lock cylinder locked with key
4–5 : Closed with door lock cylinder unlocked with key
: PARTS LOCATION
Code
See Page
B5
A
32
B6
B
32
D5
32
D6
34
: RELAY BLOCKS
Code
See Page
3
24
: JUNCTION BLOCK AND WIRE HARNESS CONNECTOR
Code
See Page
6A
26
26
6E
102
Code
D7
D8
D9
J3
A
Relay Blocks (Relay Block Location)
R/B No.3 (Left Side of Instrument Panel)
Junction Block and Wire Harness (Connector Location)
Instrument Panel Wire and J/B No.6 (Instrument Panel Brace LH)
Instrument Panel Wire and J/B No 6 (Instrument Panel Brace LH)
See Page
34
34
34
33
2000 MR2 (EWD408U)
Code
See Page
J4
B
33
U1
33

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents