Toyota MR2 2000 Manual page 113

SERVICE HINTS
R7 REMOTE CONTROL MIRROR SW
8–GROUND : Approx. 12 volts with the ignition SW at ACC or ON position
6–7 : Continuity with the operation SW at UP or LEFT position
5–7 : Continuity with the operation SW at RIGHT position and the select SW at LH position
4–7 : Continuity with the operation SW at DOWN position and the select SW at LH position
2–7 : Continuity with the operation SW at RIGHT position and the select SW at RH position
3–7 : Continuity with the operation SW at DOWN position and the select SW at RH position
: PARTS LOCATION
Code See Page
R7 33
: RELAY BLOCKS
Code See Page
3 24
: JUNCTION BLOCK AND WIRE HARNESS CONNECTOR
Code See Page
6D
26 26
6E
: CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS
Code See Page
ID1 38
II1 40
: GROUND POINTS
Code See Page
IE 38
: SPLICE POINTS
Code See Page
I2 40
Code
R10
Relay Blocks (Relay Block Location)
R/B No.3 (Left Side of Instrument Panel)
Junction Block and Wire Harness (Connector Location)
Instrument Panel Wire and J/B No.6 (Instrument Panel Brace LH) Instrument Panel Wire and J/B No 6 (Instrument Panel Brace LH)
Joining Wire Harness and Wire Harness (Connector Location)
Front Door LH Wire and Instrument Panel Wire (Left Kick Panel)
Front Door RH Wire and Instrument Panel Wire (Right Kick Panel)
Ground Points Location
Left Kick Panel
Wire Harness with Splice Points
Instrument Panel Wire
See Page
35
Code See Page
2000 MR2 (EWD408U)
Code See Page
R11 35
Wire Harness with Splice Points
105