IMPORTANT SAFETY INSTRUCTIONS n NEVER STAND ON TOOL. Serious injury could occur if the tool is tipped. WARNING: n CHECK DAMAGED PARTS. Before further use of the Read and understand all instructions. Failure to follow tool, a guard or other part that is damaged should all instructions listed below may result in electric shock, be carefully checked to determine that it will operate fire and/or carbon monoxide poisoning which will cause...
MOVING before transporting in a vehicle. n DO NOT TOUCH THE SPARK PLUG AND IGNITION n WHEN SERVICING USE ONLY IDENTICAL RYOBI CABLE when starting and operating the engine. REPLACEMENT PARTS. Use of any other parts may create a hazard or cause product damage.
Page 9
SYMBOLS Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta- tion of these symbols will allow you to operate the tool better and safer. SYMBOL NAME DESIGNATION/ExPLANATION Wet Conditions Alert Do not expose to rain or use in damp locations.
Page 10
SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury.
FEATURES PRODUCT SPECIFICATIONS Engine Size ...................................211 cc Engine Output .................................2 KW Fuel Tank Capacity ..............................3.6 litres Maximum Pressure ..............................207 bar Maximum water litres per hour .............................614 l/h Net Weight ..................................41 kg DESCRIPTION 1. Accessories storage 14. Spray wand storage 26.
OPERATION without catching, move the choke lever to the half-way WARNING: position. NOTE: Never pull the recoil starter more than four or five Always wear safety goggles or safety glasses with side times with the choke closed as this causes flooding. shields when operating tools.
OPERATION • Use higher pressure nozzle (yellow or red) for jobs such n Engage the lock out on the wand by pushing up on the lock out until it clicks into the slot. as stripping paint and degreasing the driveway. When using these nozzles, test a small area first to avoid n Pull back and hold the collar then remove the nozzle by surface damage.
MAINTENANCE CLEANING THE AIR FILTER n Remove the nozzle (11) from the spray wand. ( Fig.18) A dirty air filter will cause starting difficulty, loss of NOTE: Never point the spray wand at your face. performance, and shorten the life span of the engine. Check n Using the nozzle cleaning tool (1) provided with this the air filter monthly.
Page 15
MAINTENANCE Reconnect the spark plug wire. starter about 6 times. This should remove most of the liquid from the pump. n Refuel the machine as described earlier in the operator’s manual. PREPARING FOR USE AFTER STORAGE Pull the recoil starter grip three or four times to clean oil from the combustion chamber.
TROUBLE SHOOTING PROBLEM CAUSE SOLUTION Engine fails to start 1. Engine switch is in the off position 1. Move switch to start. 2. No fuel in tank 2. Fill tank. 3. Spark plug shorted or fouled 3. Replace spark plug. 4.
In the event of malfunction within the guarantee period, please return the product UNDISMANTLED with proof of purchase, to your dealer or nearest Ryobi Service Centre. Your statutory rights in respect of defective products remain unaffected by the warranty.