Page 1
RPW2400 PETROL PRESSURE WASHER OperatOr's manual WARNING! It is essential you read and understand the instructions in this manual before you operate this machine.
English English IMPORTANT SAFETY INSTRUCTION Never stand on the tool. Serious injury could occur ■ if the product is tipped. WARNING: Check for damaged parts. Before further use ■ Read and understand all instructions. Failure of the tool, a guard or other part that is damaged to follow all instructions listed below may result should be carefully checked to determine that it will in electric shock, fire and/or carbon monoxide...
■ moving before transporting in a vehicle. Keep the engine away from flammables and ■ When servicing use only identical ryobi other hazardous materials. ■ replacement parts. Use of any other parts may Keep away from hot parts. The muffler and other ■...
Page 4
English English SYMBOLS Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta- tion of these symbols will allow you to operate the tool better and safer. SYMBOL NAME DESIGNATION/EXPLANATION Safety Alert Precautions that involve your safety.
English English The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING Indicates an imminently hazardous situation, which, if not avoided, will result in death DANGER: or serious injury. Indicates a potentially hazardous situation, which, if not avoided, could result in WARNING: death or serious injury.
NOTE: This engine has a total lubricant capacity of pressure washer. If any parts are damaged or missing, do not operate 600ml. ■ the pressure washer and contact Ryobi® Customer ADDING PETROL TO THE FUEL TANK Service for assistance. See Figure 5. WARNING:...
English English up spills immediately. When adding petrol to the Turn the collar clockwise to tighten the hose securely ■ pressure washer, make sure the unit is sitting to the pump. on a flat, level surface. If the engine is hot, let Pull on the hose to be certain it is properly secured.
Page 8
English STARTING AND STOPPING THE PRESSURE WASHER gentle cleaning), 25˚ Green (for general purpose cleaning See Figures 11 - 12. or large surfaces), 0˚ Red (for spot cleaning or high-to- CAUTION: reach areas), and Low Pressure Black (for detergent Do not start the pressure washer without the application and rinsing).
English NOTE: Shutting off (0) the engine will not relieve pressure plug. Pour about a teaspoon of clean, air-cooled, in the system. Pull trigger to release water pressure. four-cycle lubricant through the spark plug hole into the combustion chamber. CLEANING TIPS Leaving the spark plug out, pull the starter cord two ■...
English TROUBLESHOOTING PROBLEM CAUSE SOLUTION 1. No fuel in tank Fill tank Engine fails to 2. Spark plug shorted or fouled Replace spark plug start 3. Spark plug is broken (cracked Replace spark plug porcelain or electrodes broken) Replace lead wire or attach to spark plug 4.
And according to the provisions of the regulations: 2004/108/EC (EMC Directive); 98/37/EC (Machinery Directive) before 29 December 2009; 2006/42/EC (Machinery Directive) after 29 December 2009; 2000/14/EC (Noise Directive) incl. modifications. RPW2400 Measured Sound Power Level 107.6 dB (A) Guaranteed Sound Power Level 109 dB (A) Vibration (spray gun) 2.5 m/s²...
Need help?
Do you have a question about the RPW2400 and is the answer not in the manual?
Questions and answers