Configuring Internal Flash - NGX Technologies LPC1788 Xplorer++ User Manual

User Manual: LPC1788/LPC4088 Xplorer++
Step 3: Next click on the 'Settings Option', the 'Cortex-M Target Driver Setup' window opens then select
SW port. After selection of the SW port the ULINK2/ME detected is as shown in the following image.
Click OK to complete the 'ULINK2/ME Debugger configuration'.
(Note: The Cortex M3 can be programed using SW or JTAG).

2.4 Configuring Internal Flash

Step 1: Open the KEIL blinky project, and then click on the 'Target Options'.
Page | 10
Fig.9
Fig.10