Profi Le; My Report; Orders; Activate Device - Matco Tools MAXIMUS2.0 User Manual

Take "1# injector" as an example.
To detect whether 1# injector works normally or not, click "1# injector",
the system will automatically carry out the function. After complete, a
prompt dialog box will pop up on the screen.
5.7 Profi le
This function allows users to manage your profi le.

5.7.1 My Report

This option is used to view the diagnostic report generated in process
of vehicle diagnosis. Additionally, delete, send operations are also
supported.
Tap "My Report", a list of diagnostic report will appear below the tab.
If user records the running parameters while reading data stream,
.x431 fi le will be shown on the screen.
In case the DTC result is saved as .txt file on Read Trouble Code
page, .txt fi le will be displayed on the screen.
Tap certain diagnostic report (.txt) to view it. See Fig. 5-24.
Fig. 5-21
Tap to view and perform more operations.
Tap certain diagnosis playback fi le (.x431) to view it.
On-Screen button defi nitions:
Delete: To delete the current report;
Character: To view the diagnostic report in character form.
Graph: To view the diagnostic report in waveform form.

5.7.2 Orders

This option is specially designed to facilitate on-line purchase. You can
check unpaid orders, paid orders and shopping cart. To make an on-
line order, just follow the on-screen instructions to proceed.

5.7.3 Activate Device

It is used to register your diagnostic connector.
MAXIMUS2.0 User's Manual
Fig. 5-21
21