Power On / Power Off Maximus2.0; Power On; Power Off; Tips On Finger Operations - Matco Tools MAXIMUS2.0 User Manual

3.3 Power On / Power Off MAXIMUS2.0

3.3.1 Power on

Press the POWER key to turn on MAXIMUS2.0.
Note: If it is the fi rst time you use MAXIMUS2.0 or MAXIMUS2.0
keeps idle for a long time, MAXIMUS2.0 could fail to be turned
on. It results from low battery. In this case, please recharge your
MAXIMUS2.0 for a while and try to turn it on.

3.3.2 Power off

1. Press the POWER key, an option menu will pop up on the screen.
2. Tap "Power off" to turn off MAXIMUS2.0.

3.4 Tips On Finger Operations

Actions Results
To select a item or launch a program.
Single-tap
To zoom in so that the text on a webpage appears
Double-tap
in a column that fi ts your device's screen.
Press and hold on the current interface or area
until a contextual menu pops up on the screen,
Long press
and then release it
To jump to different pages.
Slide
Tap the desktop icon and drop it to other location.
Drag
To zoom in manually, place two fingers on the
screen and then spread them apart. To zoom out,
Spread apart /
place two fingers apart on the screen and then
Pinch together
pinch them together.
8
3.5 Lock & unlock the screen
Many screen lock modes are available on MAXIMUS2.0. Take the
preset screen-lock mode as example for demonstration.

3.5.1 Lock the screen

• When MAXIMUS2.0 is ON, press POWER key once to lock the
screen;
• The system will lock the screen automatically after MAXIMUS2.0
remains idle over the preset standby time.

3.5.2 Unlock the screen

Press POWER key to activate the screen, and then drag the lock to
"Unlock" position.
Note: If you defi ne as unlock using the pattern, you have to draw
the right target pattern to unlock it.
MAXIMUS2.0 User's Manual