Matco Tools MAXIMUS2.0 User Manual page 20

1. If you are a new user, click "Register" to enter registration page.
See Fig. 5-6.
In Fig. 5-6, fill in the information in each field. After inputting, click
"Register and Log In", a prompt message similar to the following will
appear:
Fig. 5-5
Fig. 5-6
Fig. 5-7
In Fig. 5-7, click "Register Connector" if you want to experience vehicle
diagnostic software. See Fig. 5-8.
To exit and register it later, click "No connector".
Input the Serial Number and Verifi cation Code, and then click "Confi rm".
Note: The Serial Number and Verifi cation Code can be obtained
from the password envelope. See Fig. 5-9.
MAXIMUS2.0 User's Manual
Fig. 5-8
Product S/N
Verifi cation Code
Fig. 5-9
15