Alternatively, you can also register your connector by clicking "Activate
Device" in "Profi le". For details, please refer to Chapter 5.7.3 Activate
Device.
2. If you have registered to be a member, input your name/CC and
password in Fig. 5-5, and then click the "Login" button to enter the
main menu screen directly.
5.4.2 Diagnostic software layout
1
2
3
4
5
6
7
8
1
Tap
to pull down all function menu. Refer to "Chapter
5.4.3 Function menu" for details.
2
shows whether the diagnostic connector is properly
connected or not.
16
Fig. 5-10
3
Tap
to display a list of applications that are currently
running. To open an application, tap it. To remove an
application, swipe it upwards.
4
Tap
to jump to the Android System's home screen.
5
Tap
to return to the previous screen or exit the application.
6
Tap
to capture the current screen and all captured
screenshots are stored in the Screenshots folder.
9
7
Tap
to confi gure the MAXIMUS2.0 system settings and to
10
view the general information about the Display Tablet.
11
8
Tap
to fi nd more applications.
9
Vehicle region buttons: Tap different buttons to switch to
corresponding vehicles.
12
10
Login button: Tap it to log in or register the diagnostic system.
Once users have logged in successfully, it will change to your
user name.
11
Vehicle diagnosis software logo: To start diagnosing a
vehicle, you have to download the corresponding diagnostic
software. In case a diagnostic software is downloaded and
installed,
will disappear.
For details on downloading or updating a software, please
refer to "Chapter 5.5 Download/ Update Diagnostic
Software".
12
Downloadable logo:
the vehicle software logo means that this diagnosis software
is downloadable. Once it is successfully downloaded and
installed,
will disappear.
MAXIMUS2.0 User's Manual
shown at the lower right corner of