Bluetooth Setting; Diagnosis Flowchart; User And Connector Registration; User Registration - Matco Tools MAXIMUS2.0 User Manual

5.2 Bluetooth Setting

Enter MAXIMUS2.0 Bluetooth setting screen ("Settings" -->
"WIRELESS & NETWORK" --> "Bluetooth"), slide the Bluetooth switch
to ON and MAXIMUS2.0 will start searching available Bluetooth
device, click the desired connector to pair and match.
By default, the Bluetooth name is 98419*****00 (where ***** stands for
5 digits.).
Note: In case no Bluetooth setting is done before diagnostic
software is launched, you can also configure it while using the
software. For details on Bluetooth connection, please refer to "Chapter
5.6 Start diagnosing".

5.3 Diagnosis Flowchart

For new users, please follow the operation chart shown in Fig. 5-4 to
get familiar with and start using MAXIMUS2.0.
14
Fig. 5-3

5.4 User and Connector Registration

5.4.1 User registration

Tap the icon on the desktop to launch the application, a disclaimer
page will pop up on the window. Tap "I've read it", and tap "LOGIN" to
enter the login interface of diagnosis software, as indicated in Fig. 5-5.
MAXIMUS2.0 User's Manual
Fig. 5-4