Preparations; Charging Maximus2.0; On Using Your Battery - Matco Tools MAXIMUS2.0 User Manual

3 Preparations

3.1 Charging MAXIMUS2.0

1. Locate the charging slot on the bottom of MAXIMUS2.0 display
tablet and the docking station. See Fig. 3-1 & Fig. 3-2.
Fig. 3-1
2. Align the charging slots, and then dock the display tablet into the
station to ensure that it is firmly seated on the docking station.
Refer to Fig. 3-3.
3. Insert one end of the included power cord of the docking station
into the power jack, then plug the other end into the AC outlet. See
Fig. 3-2
Fig. 3-3
Fig. 3-4. If appears on the screen, it indicates it is being charged.
4. If the logo changes into
charged. Disconnect the docking station from the AC outlet.

3.2 On Using Your Battery

• If the battery keeps unused for a long time or battery is completely
discharged, it is normal in case it can not be turned on while being
charged. Please charge it for a period and then turn it on.
• P l e a s e u s e t h e i n c l u d e d p o w e r a d a p t o r t o c h a r g e y o u r
MAXIMUS2.0. We assume no responsibility for damage or loss
resulting from using other similar adaptors other than the specifi ed
one.
• To prolong the service life of the battery, avoid charging too
frequently.
• The charging time of battery varies with temperature condition and
battery consumption status.
• While MAXIMUS2.0 has low battery, a beep will sound. If it is very
low, MAXIMUS2.0 will be switched off automatically.
MAXIMUS2.0 User's Manual
To AC outlet
Fig. 3-4
, it indicates that the battery is fully
7