Setting Menu; Setting Date And Time; Setting Local Area Code; Setting Pabx Code - SPC 3606N RETRO ELEGANCE Manual

Table of Contents

Advertisement

1. In on-hook or off-hook state.
2. Press OUT key, LCD displays the last dialed number.
3. Press OUT key continuously, LCD displays...END...after all outgoing numbers are reviewed.
 Dial back outgoing call
1. In on-hook or off-hook state.
2. Press OUT key to check the desired number.
3. Press RD key, the number will be dialed out automatically.
 Deleting outgoing Call
1. In on-hook or off-hook state, press OUT key to check the number.
2. Press DEL key to erase it, and LCD displays the next number.
NOTE: Press DEL key for 3 seconds, all the outgoing calls will be erased.

SETTING MENU

SETTING DATE AND TIME

1. In on-hook state, press SET key, LCD displays SET 1 DATE.
2. Press SET key, the last two digits of year flash.
3. Press ▲ or ▼key to edit the year, press SET key to confirm, by using the same method to set
the month, date, hour and minute.
4. Press DEL key to quit.
NOTE: Month: 1-12 Date: 1-31 Hour: 00-23 Minute: 00-59.

SETTING LOCAL AREA CODE

1. In on-hook state, press SET key and then press ▲ key, LCD will display SET 2 CODE
2. Press SET key again, LCD displays CODE -----
3. Press ▲ or ▼ key to set the first digit of local area code.
4. Press SET key to confirm and enter the second digit setting, follow same steps to set the last
4 digits.
5. Press DEL key to quit.
NOTE: If the local area code only 4 digits, the last digit can be left as "-".
After set the local area code, unit will auto-filter the area code if the incoming call number with the
first several digits as same as the local area code.

SETTING PABX CODE

1. In on-hook state, press SET key and then press ▲ key twice, LCD will display SET 3
PCODE.
2. Press SET key to confirm, LCD displays PCODE --, the first "-"flash and indicate to set the
first digit of PABX code.
3. Press ▲ or ▼ key to set the PABX code. Press SET key to confirm and enter the second digit
setting.
4. Following same steps to set the second digit.
NOTE:
(NOT USED IN SPAIN)
5

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 3606N RETRO ELEGANCE and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Table of Contents