Setting Auto Ip; Setting Dialing Type; Setting Anti-Dialing Function; Setting Lcd Contrast Function - SPC 3606N RETRO ELEGANCE Manual

1. If only one digit of PABX code, left the second digit as"-".
2. If set PABX code, when dialing back incoming call or pre-dial a number, and if the number is 6
digits or more than 6 digits, the telephone will auto-add PABX code ahead the incoming number
or the pre-dialing number which is not lead by PABX code and then pause 1 second.
SETTING AUTO IP (this function is no need for European version)

SETTING DIALING TYPE

1. In on-hook state, press SET key and then press ▲ key fourth, LCD will display SET 5 P-T.
2. Press SET key to confirm, LCD displays TONE, press ▲ or ▼ key to select T (TONE) or P
(PULSE).

SETTING ANTI-DIALING FUNCTION

1. In on-hook state, press SET key and then press ▲ key fifth, LCD displays SET 6 ALAR
2. Press SET key to confirm, LCD displays ALAR OFF, press ▲ or ▼ key to select ON or OFF.
3. Press SET key to confirm.
When the anti-dialing is set to ON, users who want to dial using an extension (parallel phone) via
the same line will hear a "DI-DI, DI-DI" beep continuously and will not be allowed to make a call.

SETTING LCD CONTRAST FUNCTION

1. In on-hook state, press SET key and then press ▲ key seventh, LCD displays SET 7 LCD
2. Press SET to enter, LCD displays LCD 3, press ▲ or ▼ to select among 1~5 levels.
3. Press SET key to confirm and exit.

SETTING RINGING TONE

There are 8 kinds of ringing tone for selection:
1. In on-hook state, press HOLD/RING key, LCD display RING 01.
2. Press ▲ or ▼ key to select ring tone.
Besides, you can also press HOLD/RING key repeatedly to select the ringer.

HOLD ON MUSIC

 When talking over handset, press HOLD/RING key to enter the hold mode and the hold
music is sent out. In hold mode
1. Press HOLD/RING key to release hold mode and continue to talk over handset, or
2. Hang up handset, it enters hands-free hold mode.
 When talking at hands-free mode, press HOLD/RING key to enter the hold mode and
the hold music is sent out. In hold mode
1. Pick up handset to talk over handset, or
2. Press or HOLD/RING key to quit hold mode and talk at hands-free mode.
6