Operating Instruction; Getting Started; Receiving Calls; Making A Call - SPC 3606N RETRO ELEGANCE Manual

OPERATING INSTRUCION

GETTING STARTED

1. The unit requires 3×1.5V AAA batteries (FREE BATTERY VERSION, the batteries are
needed for blue background light only). Open the battery compartment cover and insert
the batteries in the right polarity, then close the cover (Proposal using alkali battery). There
should be time display on the liquid crystal screen after the batteries are inserted.
2. Take out handset and curly line, then plug curly line into handset jack, and plug the 3.5mm
jack-plug into
3. Insert one end of the line cord to the telephone line jack and the other end to the exchanger.
4. Connect the handset to the base of the telephone with the curly cord.

RECEIVING CALLS

The unit will ring when a call comes, if you have subscribed caller ID service to your local
telecom, LCD will display month, date, time, serial no. of the incoming call and "NEW" icon. If a
missed call number comes twice or more times, the "REP" icon will be displayed on the LCD.
 From the handset
1. Pick up the handset and talk to the other end.
2. After finished, return the handset to the base.
 Switch to speakerphone
1. When talking by handset, press
2. After finished, press
 From the speakerphone
1. When the telephone rings, press
2. After finished, press
NOTE:
Generally telecom transmits the incoming message between the first ring and the second ring.
So please answer the telephone after the second ring.

MAKING A CALL

 From the handset
1. Pick up the handset.
2. When hearing the dialing tone, dial the desired number. The LCD will start to time the
conversation.
3. After finished, return the handset to the base.
 From the speakerphone
1. Press key.
2. When hearing the dialing tone, dial the desired number. The unit will start to time the
conversation.
3. After finished, press
 Redialing function
1. Pick up the handset, or press
2. Press RD key, the number dialed will be dialed out again.
jack on the base.
key and return the handset to the base.
key again.
key and talk to the caller.
key again.
key again.
key.
3