Reviewing, Calling Back And Deleting Outgoing Numbers; Setting Menu - SPC 3604N User Manual

1. In on-hook state, press and hold ALARM key for 3 seconds, LCD displays DATE OFF,
2. Press ALARM key again, LCD displays DATE ON,
3. Press MENU key to quit.
NOTE: DATE OFF means: not allow auto-adjust real time.

REVIEWING, CALLING BACK AND DELETING OUTGOING NUMBERS

 Reviewing
In on-hook or off-hook (handset or speakerphone mode) state, press
press key to review outgoing number messages one by one.
 Calling back
1. In on-hook state, press
press key or press RLL key, and the number is dialed out.
2. In off-hook state, press
number is dialed out.
 Deleting
1. In on-hook state, press
2. Press key, it is deleted, or
3. Press and hold

SETTING MENU

In on-hook state, press MENU key to enter setting menu, press /+ or /– key to select among
different items. When you choose one item, press MENU key again to go into its setting. After
finishing with one item, pressing MENU key can also enter next setting item fleetly. If you want to
quit setting anytime, press
 Setting date & time
1. In on-hook state.
2. Press MENU key, LCD displays SET 1 DATE, press MENU key, the year value flashes.
3. Press /+ or /– key to edit the year.
4. Press MENU key to confirm and enter the next value month setting.
5. Follow same steps to set month, date and time.
6. After setting, press MENU key to confirm and enter next item setting.
 Setting Local Area Code and Long Distance Code
1. In on-hook state, press SET key, then press /+ once. LCD displays SET 2 CODE. Press
MENU key, LCD displays CODE 0----- and the long distance code "0" flashes.
2. Press /+ or /– key to set the flashing code from 0 to 9 or -.
3. Press MENU key to confirm, follow same steps to finish the rest code setting. Press MENU
key to confirm and enter the next item setting.
key to review the desired number, then pick up the handset or
key to review the desired number, press REDIAL key, the
key to review the desired number,
key for 3 seconds, then all numbers are deleted.
key to perform.
6
key, then repeat to