Advertisement

INTRODUCTION
Thank you for your purchasing our newest Caller ID phone. This manual is designed to
familiarize you with this phone. To get the maximum use from your new phone, we suggest that
you read this Instruction Manual carefully before operating it.

SAFETY INSTRUCTION

When using your telephone equipment, the following basic safety precautions should always be
followed to reduce the risk of fire, electric shock and injury to persons:
1. Read and understand all instructions
2. Follow all warnings and instructions.
3. Unplug the product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use damp cloth for cleaning.
4. Do not place this product on an unstable cart, stand or table. The product may fall, causing
serious damage to the product.
5. Do not overload wall outlets and extension cords as this can result in the risk of fire or electric
shock.
6. Never push objects of any kind into this product through cabinet slots as they may touch
dangerous voltage points or short out parts that could result in a risk of fire or electric shock.
Never spill liquid on the product.
7. Avoid using this unit during an electrical storm, move or disconnect the unit, there may be a
remote risk of electronic shock from lightning and thunder.
8. Unauthorized persons cannot open or service even if there is a defect with the unit. This will
void the warranty, please send to service center for any defects.
FEATURES
 FSK/DTMF compatible with auto-detection
 16-digit LCD display
 99 incoming and 18 outgoing numbers memories
 7 one-touch memories
 5 kinds of normal ringing tone and 4 kinds of chord music
 3 kinds of hold on music for selection
 Do Not Disturb function
 Intercom and transfer function between parallel phones (using 2 similar models)
 Pre-dial and edit function
 Redial function
 Pause function
 Mute function
 5 sets of alarm clock
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 3604N and is the answer not in the manual?

Questions and answers

Summary of Contents for SPC 3604N

  • Page 1: Safety Instruction

    INTRODUCTION Thank you for your purchasing our newest Caller ID phone. This manual is designed to familiarize you with this phone. To get the maximum use from your new phone, we suggest that you read this Instruction Manual carefully before operating it. SAFETY INSTRUCTION When using your telephone equipment, the following basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons:...
  • Page 2  Calculator and key tone function  Set PABX code  16 levels of LCD contrast  Pulse/Tone dialing mode compatible  4 levels of hands-free volume for selection  Ringing volume 5 steps selectable  LCD Backlight function  Thunder-proof and anti-dialing from parallel phones ...
  • Page 3 LOCATION DISCRIPTION...
  • Page 4: Getting Started

    GETTING STARTED 1. The unit requires 3×1.5V AA batteries. Open the battery compartment cover and insert the batteries in the right polarity, then close the cover (Proposal using alkaline battery). There should be time display on the liquid crystal screen after the batteries are inserted. 2.
  • Page 5: Reviewing, Calling Back And Deleting Incoming Numbers

     From Speakerphone 1. Press 2. When hearing the dialing tone, dial the desired number. 3. The unit start to time conversation after 6 seconds, 4. After finished, press key again.  Pre-dialing function 1. In on-hook state 2. Dial the desired number, if any mistake use key to edit.
  • Page 6: Reviewing, Calling Back And Deleting Outgoing Numbers

    1. In on-hook state, press and hold ALARM key for 3 seconds, LCD displays DATE OFF, 2. Press ALARM key again, LCD displays DATE ON, 3. Press MENU key to quit. NOTE: DATE OFF means: not allow auto-adjust real time. REVIEWING, CALLING BACK AND DELETING OUTGOING NUMBERS ...
  • Page 7  Adjusting LCD Contrast 1. In on-hook state, press MENU key, then press /+ twice, LCD displays SET 3 LCD. Press MENU key, LCD displays LCD 08 2. Press /+ or /– key to adjust the contrast of LCD, total 16 levels can be selected. 3.
  • Page 8 up its handset or press key to perform in-house conversation (this function just for your selection). 2. Please use same series phones to transfer as above operation. Any special services starting with “*” offered by your Telephone company may not function properly. To get the best effect of this function, you should load the batteries before using.
  • Page 9: Music On Hold

    SET PCODE - and the “-” flashes. 2. Press /+ or /– key to set PABX code from 0 to 9 or -. 3. If choose “-”, it means no PABX code has been set. 4. Press MENU key to confirm and quit. MUSIC ON HOLD ...
  • Page 10 FLASH FUNCTION When dial a number, but the line is busy, press the R/÷ key and then press RLL key to dial it out again. PAUSE FUNCTION When dial a number, press PAUSA key, the unit will give a 3.6 seconds interval between the numbers.
  • Page 11 Noise Check if the circuit is broken. (Change the circuit) Check if the connector is moist or rust (Change the connector) Ring once then disconnect when receive a call. Dialing function is available Check if connector is in a moist environment. Check if too many extensions are used together or the quality of extension is not good enough (Change the bad extension) LCD become dim...

Table of Contents