Copy Data From Your Camera To The Computer - Sanyo Xacti VPC-CA102 Instruction Manual

Copy data from your camera to the computer

Connect your camera to a computer, and copy the desired data to the
computer.
1
Turn on the computer, and use the supplied dedicated USB interface
cable to connect your camera to the computer.
h Connect the cable between the camera's USB AV terminal and the
computer's USB connector.
2
Turn on the camera (page 30).
h The USB Connection Screen appears on the camera's monitor.
To USB AV terminal
Supplied dedicated
USB interface cable
ix
English
USB CONNECTION
COMPUTER
PRINTER
CANCEL
CANCEL
Terminal cover
OK
To USB connector