File Protect Setting - Sanyo Xacti VPC-CA102 Instruction Manual

File protect setting

Prevent accidental erasure of image and audio files.
Protect files one by one
1
Display the file that you want to protect from accidental erasure, and
display the NORMAL Mode Playback Menu (page 37).
2
Select "PROTECT" and press the SET button.
3
Select "PROTECT SINGLE" and
press the SET button.
h "LOCK" appears.
h If the protect mode has already
been enabled for the file, then
"UNLOCK" appears.
4
Select "LOCK" and press the SET
button.
h The protect mode is set for the
file.
h The protect mark B indicates
that the file is locked.
CAUTION
i Even if the protect mode is set for certain files, they will be deleted if the
card is reformatted.
HINT
To select a different image in step 3...
i Press [G] or [H].
To cancel the protect mode for a file...
i Display the desired file and repeat steps 1 to 4. The protect mark B will
disappear and the protect mode is canceled.
PROTECT
LOCK
EXIT
OK
English
100