2. ASSEMBLING THE TESTER
Preparing to assemble the tester
Remove the separation plate from the weighing
chamber of the BM balance.
Note: Take care that the separation plate is
not broken when operating it.
1
Support the separation plate and
remove the screw from the plate.
2
Lift the plate and remove hooks.
3
Rotate the plate on the axis of the back edge.
Rotate the plate on the axis of the front edge.
4
Remove the plate from the chamber.
5
Remove the weighing pan and so on (refer to the figure below) from the BM balance.
BM-200
BM-500
BM-22
5
6
1
Screw
Hook
4
Separation plate
Hook
BM-300
、
、
BM-252
、
Weighing pan
Pan support
Fine range ring
Breeze break
ring
Dust plate
BM-20
、
Weighing pan
Pan support
Small fine range ring
Fine range ring
Dust plate
3
1
2
3
BM-252