Description Of Each Component - AND BM Series Instruction Manual

1-2 Description of Each Component

 Evaporation trap
A chamber to prevent the evaporation of the dispensed test liquid (distilled water).
(Refer to "1-4 Function of the Evaporation Trap".)
 Sample cup holder for BM
Use to hold the 5 mL sample cup.
 5 mL sample cup
A measuring cup to contain the test liquid dispensed from a pipette, with a
water-absorbent sheet installed, to prevent water droplets from remaining on
the edge of the pipette tip.
 Test liquid cup
A container to keep a test liquid such as distilled water.
 Thermometer (with a clamp)
Measures the temperature of the test liquid.
 RS-232C cable and USB converter
Connects to a PC (personal computer) to transmit the test
values to the PC.
 WinCT-Pipette
Software for pipette accuracy testing to convert the test liquid mass
into a volumetric value.
 Balance weight
Use this balance weight when using the pipette accuracy tester kit with
the following BM models: BM-252/500/300/200.
3