Connecting The Energy Pack To The Controller - GE PACSystems RX3i IC695ACC403 Quick Start Manual

Figure 4: Energy Pack Input Power Mating
Insert the plug into the Energy Pack's Input
2.
Power connector and securely tighten the
attaching screws.
3.2 Connecting the Energy Pack to the
Controller
With power to the system turned off, use the
supplied cable (IC695CBL003) to connect the
output of the Energy Pack (green connector) to
the 24Vdc input on the Controller (3-pin green
connector) and to the serial communication link
(using the 5-pin green connector). Refer to
Figure 5.
GFK-3000A IC695ACC403 Quick Start Guide
Connector (bottom view)
6