Table of Contents
Advertisement
Product installation
To operate the Biomat follow the steps below.
Spread the Biomat out on a flat area. The side with the
1.
ridges should be facing up.
Connect the controller / power cable to the connection port of
2.
the Biomat. To ensure a secure connection, there should be
no space between the two joinings. The connection may be
tight at first.
NOTE: Use care when handling the controller / power cable
to prevent accidental breakage. Do not drop, stand
on or place heavy objects on the controller / power
cable. Never pull the power cable to remove the plug
from the receptacle, be sure to hold the plug.
Plug the controller / power cable into a 120V or 220V
3.
outlet, depending on the voltage of the controller.
120V
220V
18
Advertisement
Table of Contents
