Product Installation - Richway & Fuji Bio Mini Biomat User Manual

Product installation

Checklist before product installation
Check the following before using the Biomat.
Check if the floor of the area for product installation is flat.
1.
▪ If used in a non-flat area, the product may be damaged.
▪ Do not place on surfaces sensitive to heat.
Do not use the product in area with high humidity or significant dust.
2.
Handle the product with care. Any physical impact such as dropping
3.
the Biomat and/or controller can damage internal components.
Check the voltage before installing the product.
4.
▪ Voltage for the product: 120V or 220V
▪ Electric shock or damage to the Biomat can result from improper
voltage.
▪ The Biomat's voltage must be the same as the controller's voltage.
(120V Biomat + 120V Controller / 220V Biomat + 220V Controller)
Inspect the plug, power cable, and power outlet for any
5.
damage.
▪ Do not use the Biomat if any of the above is damaged.
Electric shock or fire can result from damaged components.
17
120V