Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Richway & Fuji Bio Biobelt
Summary of Contents for Richway & Fuji Bio Biobelt
- Page 1 BIOBELT User Manual...
-
Page 2: Table Of Contents
Checklist before product installation ..................13 Product installation ........................ 14 Checklist after product installation ..................15 Product specifications ......................16 How to use the Biobelt ....................8 Turning ON and OFF ......................18 Adjusting the product’s temperature ..................19 Useful information .......................2 How to clean and store the product .................. -
Page 3: Safety Precautions
Safety Precautions Read and follow all instructions in this manual. Proper use of the Biobelt will prevent harm to the user and damage to private property. The contents are described in three categories Danger, Warning, and Caution. Serious injury or death can occur if instructions are not followed properly. - Page 4 Biobelt. cord do not use. Do not plug the Biobelt into a power strip with If there is a power outage, turn off the power and other devices. Problems may occur. Plug the disconnect the plug.
- Page 5 Warning Do not use the Biobelt in areas where it is very Do not submerge the Biobelt in water to clean. humid or can get wet. Doing so may cause elec- Simply wipe with a moist towel. tric shock or fire.
- Page 6 This is not permitted and may cause injury, elderly with difficulty electric shock or fire. moving should not use the Biobelt. Do not use or connect the Biobelt to any other electronic device. This may cause injury, electric shock or fire.
- Page 7 Do not run, stand, or place heavy objects on the allow anything to puncture the folds of the Biobelt. Biobelt. Do not place the controller on the Biobelt when in Do not operate the Biobelt near objects which generate heat or magnetic fields such as ventilation use.
- Page 8 1. Do not use the Biobelt if your skin is insensitive to temperature change. 2. If using the Biobelt for a long period of time, check your skin to make sure there are no burns or blisters. Stop using the Biobelt if burns or blisters occur.
- Page 9 BIOBELT BIOBELT RICHWAY Before using the product Product components Product description RICHWAY GROUP...
-
Page 10: Read Before Operating The Product
Read before operating the product Product components The box will contain the Biobelt, controller with power cable and a user manual. ※ The components may change without notice due to product improvement. Biobelt Biobelt Controller / Power Cable User Manual... -
Page 11: Product Description
Product description Each part of the Biobelt and how to operate it are described here. Biobelt Power and Controller connector The controller / power cable only fits one way. Belt contact Power and Controller Heat is generated from this region. - Page 12 Controller Power indication lamp When the Biobelt is turned on, the light will be green. Temperature indication window The current Biobelt temperature Temperature adjustment is indicated. (Indication value: button 95 ~ 149°F / 35 ~ 65°C) Press the Temp Up or Temp Down button to increase or decrease the temperature.
-
Page 13: Product Installation
BIOBELT BIOBELT RICHWAY Product installation Checklist before product installation Product installation Checklist after product installation Product specifications RICHWAY GROUP... -
Page 14: Checklist Before Product Installation
(120V Biobelt + 120V controller / 220V Biobelt + 220V controller) Inspect the plug, power cable, and power outlet for any damage. ▪ Do not use the Biobelt if any of the above is damaged. Electric shock or fire can result from damaged components. -
Page 15: Product Installation
Product installation To operate the Biobelt, follow the steps below. First, connect the controller / power cable to the connection port of the Biobelt. Second, plug the controller / power cable into a 120V or 220V outlet. 120V 220V... -
Page 16: Checklist After Product Installation
Checklist after product installation Test the Biobelt. After turning on the Biobelt, check the following to make sure the Biobelt is operating properly. Press the power button on the controller and then check for any plug/power system problems. After turning on the Biobelt, make sure the power light turns green. -
Page 17: Product Specifications
< 5 mA < 10 mA Testing in accordance with IEC 60601-1-2 indicates the following: The Biobelt needs no special precautions regarding EMC before being put into service. Portable and mobile RF communications equipment have no adverse effects on the Biobelt. - Page 18 BIOBELT BIOBELT RICHWAY How to use the Biobelt Turning ON and OFF Adjusting the product’s temperature RICHWAY GROUP...
-
Page 19: How To Use The Biobelt
How to use the Biobelt Turning ON and OFF The Biobelt can be used on the legs, arms, shoulders, and waist. Its small size makes it easy to transport. Turn the Biobelt on by pressing the [Power] button. The indicator lamp will turn green. -
Page 20: Adjusting The Product's Temperature
Biobelt and your skin to prevent low temperature burns. Do not place the Biobelt directly on your skin. Doing so may cause burns or injury to your skin. Place a towel between the Biobelt and your skin during use. -
Page 21: Useful Information
BIOBELT BIOBELT RICHWAY Useful information How to clean and store the product Trouble shooting guide Check before contacting customer service Customer service information Product manufacturing information Application specification Symbol glossary Product warranty RICHWAY GROUP... -
Page 22: How To Clean And Store The Product
- Doing so may cause electric shock or short circuit. Caution When cleaning the Biobelt, make sure to turn off the power and unplug it. How to store the Biobelt Store the Biobelt lying flat (not folded) and in a well ventilated area. -
Page 23: Trouble Shooting Guide
Trouble shooting guide If the alarm lamp on the controller is flickering while using the Biobelt, follow this guide. If the alarm lamp continues to flicker after the following method, stop use of the product and contact Customer Service. Indicator Lamp... -
Page 24: Customer Service Information
Customer service information If your Biobelt is not working properly call our Customer Service Center. CUSTOMER SERVICE CENTER Tel: 1-808-589-2800 Toll-Free: 1-855-338-6410 (USA, Canada, Guam, Saipan) Homepage: www.richwayandfujibio.com... -
Page 25: Product Manufacturing Information
Product manufacturing information The information on the certificate of complete product manufacturing is attached to the rear side of the controller and rear side of Biobelt. Product : Product : BIOMAT SINGLE BIOMAT QUEEN Product : BIOMAT KING 120V~ 120V~... -
Page 26: Application Specification
Application specification INDICATIONS FOR USE The Biobelt is indicated for the temporary relief of minor muscle and joint pain and stiffness; the temporary relief of joint pain associated with arthritis; the temporary relief of muscle spasms, minor sprains and strains, and minor muscular back pain;... -
Page 27: Symbol Glossary
Symbol glossary Symbol Meaning Symbols of general warning General warning sign Type BF Applied part CLASS ll equipmet Alternating Current Waste disposal Stepping prohibited Sitting prohibited Keep dry Serial Number “ON” (power) To indicate connection to the mains, at least for mains switches or their posi- tions, and all those cases where safety is involved. - Page 28 MEMO...
-
Page 29: Product Warranty
Product warranty Product name BIOBELT Model name 3 years from the date of Manufacturing Warranty period Order information product purchase number Date of Branch of purchase purchase Customer Name Purchase price information Richway & Fuji Bio warrants the covered product to be free from defects and malfunctions at the time sold. - Page 30 MEMO...
- Page 31 Biobelt product Front Side...
- Page 32 BIOBELT Manufacturer: R&L Co., Ltd. Address: 11F, Ace Gwangmyeong Tower B, 108 Haan-Ro, Gwangmyeong-Si, Gyeonggi-Do, Korea 14319 Customer Center: 1-808-589-2800 / 1-855-338-6410 READ AND FOLLOW THE INSTRUCTIONS IN THIS MANUAL TO PREVENT PERSONAL HARM AND PROPERTY DAMAGE. DOCUMENT NO: RW-USM-002 (Ver. 1.0, Date: 2015. 11.25)
Need help?
Do you have a question about the Biobelt and is the answer not in the manual?
Questions and answers