Introduction & Important Safety Information 4 - Kärcher Landa HOT 2-1100 Operator's Manual

INTRODUCTION & IMPORTANT SAFETY INFORMATION
Thank you for purchasing this Pressure Washer.
We reserve the right to make changes at any time
without incurring any obligation.
Owner/User Responsibility:
The owner and/or user must have an understand-
ing of the manufacturer's operating instructions and
warnings before using this pressure washer. Warning
information should be emphasized and understood.
If the operator is not fluent in English, the manufac-
turer's instructions and warnings shall be read to and
discussed with the operator in the operator's native
language by the purchaser/owner, making sure that
the operator comprehends its contents.
Owner and/or user must study and maintain for future
reference the manufacturers' instructions.
The operator must know how to stop the machine
quickly and understand the operation of all controls.
Never permit anyone to operate the engine without
proper instructions.
SAVE THESE INSTRUCTIONS
This manual should be considered a permanent
part of the machine and should remain with it if
machine is resold.
When ordering parts, please specify model and
serial number. Use only identical replacement parts.
This machine is to be used only by trained operators.
IMPORTANT SAFETY
INFORMATION
WARNING: To reduce the risk of
injury, read operating instruc-
tions carefully before using.
READ OPERATOR'S
MANUAL THOROUGH-
LY PRIOR TO USE.
2. Know how to stop the machine and bleed pressure
quickly. Be thoroughly familiar with the controls.
3. Stay alert — watch what you are doing.
4. All installations must comply with local codes.
Contact your electrician, plumber, utility company
or the selling distributor for specific details. If your
machine is rated 250 volts or less, single phase will
be provided with a ground fault circuit interrupter
(GFCI). If rated more than 250 volts, or more than
single phase this product should only be connected
to a power supply receptacle protected by a GFCI.
4
1. Read the owner's manual
thoroughly. Failure to follow
instructions could cause mal-
function of the machine and
result in death, serious bodily
injury and/or property dam-
age.
8.917-208.0 • HOT • Rev. 05/17
DANGER: Improper connection of the equipment-
grounding conductor can result in a risk of elec-
trocution. Check with a qualified electrician or
service personnel if you are in doubt as to whether
the outlet is properly grounded. Do not modify the
plug provided with the product - if it will not fit the
outlet, have a proper outlet installed by a qualified
electrician. Do not use any type of adaptor with
this product
WARNING: Keep wand, hose, and
WARNING
water spray away from electric
wiring or fatal electric shock may
result.
5. To protect the operator from
electrical shock, the machine
must be electrically grounded.
KEEP WATER
SPRAY AWAY FROM
It is the responsibility of the
ELECTRICAL WIRING.
owner to connect this machine
to a UL grounded receptacle of proper voltage and
amperage ratings. Do not spray water on or near
electrical components. Do not touch machine with
wet hands or while standing in water. Always discon-
nect power before servicing.
WARNING: Flammable liquids
WARNING
can create fumes which can ig-
nite, causing property damage
or severe injury.
WARNING: Risk of explosion —
Operate only where open flame
RISK OF EXPLOSION:
or torch is permitted.
OPERATE ONLY
WHERE OPEN FLAME
OR TORCH IS PERMIT-
TED
6. In oil burning models, use only kerosene, No. 1 home
heating fuel, or diesel. If diesel is used, add a soot
remover to every tankful.
WARNING: Risk of fire — Do not
WARNING
add fuel when the product is
operating or still hot.
WARNING: Do not use gasoline
crankcase draining or oil con-
taining gasoline, solvents or
RISK OF FIRE.
alcohol. Doing so will result in
DO NOT ADD FUEL
WHEN OPERATING
fire and/or explosion.
MACHINE.
7. This pressure washer shall be installed only in
locations where combustible dusts and flammable
gases or vapors are not present. Do not store or use
gasoline near this machine.
8. Do not allow acids, caustic or abrasive fluids to pass
through the pump.
9. Never run pump dry or leave spray gun closed longer
than 1-2 minutes.
10. Keep operating area clear of all persons.